Standard Dies

Upper Dies

Flat Drawing

All part numbers beginning with "P" are for 100lb Little Giants.

Size Model Workface Variants
25lb H7OS 2" x 3" Flat, Drawing
50lb K70S 2 1⁄2" x 4" Flat, Drawing
100lb P7 3" x 6" Flat, Drawing
P7XL 3" x 8" Flat
250lb S7 4" X 8" Flat

Note: Upper Dies for 25 and 50 LB Little Giants were 1⁄2" smaller from front to back than the lower dies. We make our upper dies oversized as compared to the originals so the workface matches that of the lower dies, thus the use of “OS” in the part number.

Lower Dies
We now make all lower dies with straight cut shoulders to make it easier to attach tooling and work material from the sides of the die.

Flat Drawing
Size Model Workface Variants
25lb H8 2" x 3" Flat, Drawing
50lb K8 2 1⁄2" x 4" Flat, Drawing
100lb P8 3" x 6" Flat, Drawing
P8XL 4" x 8" Flat
250lb S8 4" x 8" Flat
*All 100 & 250 LB Lower Dies have straight cut sides, as shown here.

Combination Dies for upper and lower

Size Model Workface
25lb H7C/H8C 2" x 4"
50lb K7C/K8C 2 1⁄2" x 5"
100lb P7C/P8C 3" x 6"
100lb P7C XL/P8C XL 3" x 8"